WWP-LEOS-VPLS-MIB :: wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy

MIB Reference — IPNetwork Monitor · Updated September 30, 2026

All MIBs › WWP-LEOS-VPLS-MIB › wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy

wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy

Module: WWP-LEOS-VPLS-MIB

OID (symbolic): WWP-LEOS-VPLS-MIB::wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy

OID (numeric): 1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switch

What is wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy?

Selects leave, provider-inherit, or inheritVs (default) for how this EVPL member's subscriber 802.1p priority is handled. An admin leaves inheritVs so the member follows the parent VSI's policy unless a per-port override is needed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6
snmpwalk -v2c -c public <target> WWP-LEOS-VPLS-MIB::wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6.1
snmpget -v2c -c public <target> WWP-LEOS-VPLS-MIB::wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6.1 i <value>

Start monitoring Ciena/WWP LEOS-based Ethernet switches, VPLS provider edge nodes (pseudowire-binding/MAC-table/VLAN-tag status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-VPLS-MIB::wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS-based Ethernet switches, VPLS provider edge nodes (pseudowire-binding/MAC-table/VLAN-tag status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.28wwpLeosVplsMIBWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1wwpLeosVplsMIBObjectsWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1wwpLeosVplsWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1.32wwpLeosVplsVirtualSwitchMplsEvplMemberTableWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1.32.1wwpLeosVplsVirtualSwitchMplsEvplMemberEntryWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicyWWP-LEOS-VPLS-MIB