WWP-LEOS-VPLS-MIB :: wwpLeosVplsStaticLabelRangeStart

MIB Reference — IPNetwork Monitor · Updated September 30, 2026

All MIBs › WWP-LEOS-VPLS-MIB › wwpLeosVplsStaticLabelRangeStart

wwpLeosVplsStaticLabelRangeStart

Module: WWP-LEOS-VPLS-MIB

OID (symbolic): WWP-LEOS-VPLS-MIB::wwpLeosVplsStaticLabelRangeStart

OID (numeric): 1.3.6.1.4.1.6141.2.60.28.1.1.9.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Setting this object will set the lowest label that can be assigned to static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsStaticLabelRangeStart and wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart must always be less than wwpLeosVplsStaticLabelRangeEnd. The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.

What is wwpLeosVplsStaticLabelRangeStart?

The lowest MPLS label (0, or 16-1048575) reserved for statically-assigned tunnels/VCs; must stay below the paired range-end value, and 0 disables the static range. An admin carves out this range so static labels never collide with dynamically-signaled ones.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.28.1.1.9.3
snmpwalk -v2c -c public <target> WWP-LEOS-VPLS-MIB::wwpLeosVplsStaticLabelRangeStart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.28.1.1.9.3.1
snmpget -v2c -c public <target> WWP-LEOS-VPLS-MIB::wwpLeosVplsStaticLabelRangeStart.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.28.1.1.9.3.1 i <value>

Start monitoring Ciena/WWP LEOS-based Ethernet switches, VPLS provider edge nodes (pseudowire-binding/MAC-table/VLAN-tag status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-VPLS-MIB::wwpLeosVplsStaticLabelRangeStart OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS-based Ethernet switches, VPLS provider edge nodes (pseudowire-binding/MAC-table/VLAN-tag status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.28wwpLeosVplsMIBWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1wwpLeosVplsMIBObjectsWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1wwpLeosVplsWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1.9wwpLeosVplsGlobalAttrsWWP-LEOS-VPLS-MIB
1.3.6.1.4.1.6141.2.60.28.1.1.9.3wwpLeosVplsStaticLabelRangeStartWWP-LEOS-VPLS-MIB