All MIBs › WWP-LEOS-TABLE-CHG-NOTIF-MIB › wwpLeosListenerRefreshTimer
wwpLeosListenerRefreshTimer
Module: WWP-LEOS-TABLE-CHG-NOTIF-MIB
OID (symbolic): WWP-LEOS-TABLE-CHG-NOTIF-MIB::wwpLeosListenerRefreshTimer
OID (numeric): 1.3.6.1.4.1.6141.2.60.9.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this value will set the listener refresh timer. Device will send the trap notification 'wwpLeosTableRefreshTrap' after every 'wwpLeosListenerRefreshTimer' seconds if count value associated with 'wwpLeosListenerEntry' becomes 20 or 10 or 5. Device will delete entry from wwpLeosListenerEntry once count = 0. Minimum value is 30 sec and maximum = 1000 seconds.
What is wwpLeosListenerRefreshTimer?
Sets, in seconds, how often the device sends a wwpLeosTableRefreshTrap reminding a registered listener (NMS/EMS) to refresh its registration once its associated refresh count reaches 20, 10, or 5. Admins use this to control how proactively the device warns management stations that their listener registration is about to expire and get deleted once the count reaches 0, giving them time to re-register. Setting wwpLeosListenerRefreshTimer to 100 seconds means a listener with a low remaining count gets reminded every 100 seconds to renew before being automatically dropped from the table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.9.1.2 snmpwalk -v2c -c public <target> WWP-LEOS-TABLE-CHG-NOTIF-MIB::wwpLeosListenerRefreshTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.9.1.2.1 snmpget -v2c -c public <target> WWP-LEOS-TABLE-CHG-NOTIF-MIB::wwpLeosListenerRefreshTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.9.1.2.1 i <value>
Start monitoring Ciena LEOS / World Wide Packets Metro Ethernet device (config-table-change EMS notification status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-TABLE-CHG-NOTIF-MIB::wwpLeosListenerRefreshTimer OID value, configure state conditions and alerts, and monitor any Ciena LEOS / World Wide Packets Metro Ethernet device (config-table-change EMS notification status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.9 | wwpLeosTableChgNotifMIB | WWP-LEOS-TABLE-CHG-NOTIF-MIB |
| 1.3.6.1.4.1.6141.2.60.9.1 | wwpLeosTableChgNotifMIBObjects | WWP-LEOS-TABLE-CHG-NOTIF-MIB |
| 1.3.6.1.4.1.6141.2.60.9.1.2 | wwpLeosListenerRefreshTimer | WWP-LEOS-TABLE-CHG-NOTIF-MIB |