WWP-LEOS-PORT-MIB :: wwpLeosEtherPortAcceptableFrameTypes

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-LEOS-PORT-MIBwwpLeosEtherPortAcceptableFrameTypes

wwpLeosEtherPortAcceptableFrameTypes

Module: WWP-LEOS-PORT-MIB

OID (symbolic): WWP-LEOS-PORT-MIB::wwpLeosEtherPortAcceptableFrameTypes

OID (numeric): 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitOnlyUntagged(3) is set, the device will discard VLAN tagged frames received on this port. With admitOnlyUntagged(3) and admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for this port.

This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.

What is wwpLeosEtherPortAcceptableFrameTypes?

Controls which frame types this port accepts on ingress: all frames, only VLAN-tagged frames, or only untagged/priority-tagged frames, per IEEE 802.1Q. Admins restrict this to admitOnlyVlanTagged on trunk ports to enforce that only properly tagged traffic is allowed in.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17
snmpwalk -v2c -c public <target> WWP-LEOS-PORT-MIB::wwpLeosEtherPortAcceptableFrameTypes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17.1
snmpget -v2c -c public <target> WWP-LEOS-PORT-MIB::wwpLeosEtherPortAcceptableFrameTypes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17.1 i <value>

Start monitoring Ciena (World Wide Packets LEOS) carrier Ethernet switches (port speed/duplex/VLAN-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-PORT-MIB::wwpLeosEtherPortAcceptableFrameTypes OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets LEOS) carrier Ethernet switches (port speed/duplex/VLAN-handling status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.2wwpLeosPortMIBWWP-LEOS-PORT-MIB
1.3.6.1.4.1.6141.2.60.2.1wwpLeosPortMIBObjectsWWP-LEOS-PORT-MIB
1.3.6.1.4.1.6141.2.60.2.1.1wwpLeosEtherPortWWP-LEOS-PORT-MIB
1.3.6.1.4.1.6141.2.60.2.1.1.1wwpLeosEtherPortTableWWP-LEOS-PORT-MIB
1.3.6.1.4.1.6141.2.60.2.1.1.1.1wwpLeosEtherPortEntryWWP-LEOS-PORT-MIB
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17wwpLeosEtherPortAcceptableFrameTypesWWP-LEOS-PORT-MIB