All MIBs › WWP-LEOS-FLOW-MIB › wwpLeosFlowSMappingNetType
wwpLeosFlowSMappingNetType
Module: WWP-LEOS-FLOW-MIB
OID (symbolic): WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingNetType
OID (numeric): 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object specifies the NETWORK object TYPE for the entry. - - If set to 'none', the corresponding value in - wwpLeosFlowSMappingNetValue MUST be zero(0). - - If set to vlan, a valid vlan-id must be specified. - If set to vsi, a valid ethernet virtual-switch-instance id must be specified. - If set to vsi_mpls, a valid mpls virtual-switch-instance id must be specified - - This used as index in the table.
What is wwpLeosFlowSMappingNetType?
Specifies how the NETWORK half of a service-mapping entry's index should be interpreted: none (no network match), vlan (match a VLAN ID), vsi (an Ethernet virtual-switch-instance ID), or vsiMpls (an MPLS virtual-switch-instance ID). It works with wwpLeosFlowSMappingNetValue, which must be 0 when this is 'none' and a valid ID of the matching kind otherwise.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1 snmpwalk -v2c -c public <target> WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingNetType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1.1 snmpget -v2c -c public <target> WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingNetType.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wwpLeosFlowSMappingNetType.1
Start monitoring Ciena (World Wide Packets) LEOS-based carrier Ethernet access/aggregation switches (MAC-motion event/CPU-rate-limit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingNetType OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets) LEOS-based carrier Ethernet access/aggregation switches (MAC-motion event/CPU-rate-limit status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.6 | wwpLeosFlowMIB | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1 | wwpLeosFlowMIBObjects | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1 | wwpLeosFlow | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1.13 | wwpLeosFlowSMappingTable | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1.13.1 | wwpLeosFlowSMappingEntry | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1 | wwpLeosFlowSMappingNetType | WWP-LEOS-FLOW-MIB |