All MIBs › WWP-LEOS-FLOW-MIB › wwpLeosFlowSMappingCosType
wwpLeosFlowSMappingCosType
Module: WWP-LEOS-FLOW-MIB
OID (symbolic): WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingCosType
OID (numeric): 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object specifies the CLASS OF SERVICE object TYPE for the entry. - - If set to 'none', the corresponding value in - wwpLeosFlowSMappingCosValue MUST be zero(0). - - If set to tcpSrcPort, tcpDstPort, udpSrcPort, or udpDstPort, - a valid, NON-ZERO tcp or udp port must be specified. - - If set to phb, a valid per-hop-behavior enumeration must be specified. - If set to dscp, a valid differentiated services code point must be specified. - If set to ipPrec, a valid ip-precedence must be specified. - If set to dot1dPri, a valid 802.1d/p priority must be specified. - If set to cvlan, a support Customer VLAN must be specified - - This used as index in the table.
What is wwpLeosFlowSMappingCosType?
Specifies which class-of-service marking a service-mapping entry classifies on - e.g. DSCP, IP precedence, 802.1p priority, MPLS EXP, PHB, a TCP/UDP port, PCP, or customer VLAN - with 'none' meaning no CoS match is applied. It pairs with wwpLeosFlowSMappingCosValue, whose valid range depends on which of these types is selected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7 snmpwalk -v2c -c public <target> WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingCosType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7.1 snmpget -v2c -c public <target> WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingCosType.1
Start monitoring Ciena (World Wide Packets) LEOS-based carrier Ethernet access/aggregation switches (MAC-motion event/CPU-rate-limit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingCosType OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets) LEOS-based carrier Ethernet access/aggregation switches (MAC-motion event/CPU-rate-limit status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.6 | wwpLeosFlowMIB | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1 | wwpLeosFlowMIBObjects | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1 | wwpLeosFlow | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1.13 | wwpLeosFlowSMappingTable | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1.13.1 | wwpLeosFlowSMappingEntry | WWP-LEOS-FLOW-MIB |
| 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7 | wwpLeosFlowSMappingCosType | WWP-LEOS-FLOW-MIB |