WWP-LEOS-FLOW-MIB :: wwpLeosFlowBurstConfigBacklogLimit

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WWP-LEOS-FLOW-MIB › wwpLeosFlowBurstConfigBacklogLimit

wwpLeosFlowBurstConfigBacklogLimit

Module: WWP-LEOS-FLOW-MIB

OID (symbolic): WWP-LEOS-FLOW-MIB::wwpLeosFlowBurstConfigBacklogLimit

OID (numeric): 1.3.6.1.4.1.6141.2.60.6.1.1.41

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Sets the queue backlog-limit

What is wwpLeosFlowBurstConfigBacklogLimit?

Sets the maximum queue backlog, in bytes (0-131072), the device will tolerate before applying burst-control action - a global ceiling on how much traffic can pile up in a queue during a burst.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.6.1.1.41
snmpwalk -v2c -c public <target> WWP-LEOS-FLOW-MIB::wwpLeosFlowBurstConfigBacklogLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.6.1.1.41.1
snmpget -v2c -c public <target> WWP-LEOS-FLOW-MIB::wwpLeosFlowBurstConfigBacklogLimit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.6.1.1.41.1 i <value>

Start monitoring Ciena (World Wide Packets) LEOS-based carrier Ethernet access/aggregation switches (MAC-motion event/CPU-rate-limit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-FLOW-MIB::wwpLeosFlowBurstConfigBacklogLimit OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets) LEOS-based carrier Ethernet access/aggregation switches (MAC-motion event/CPU-rate-limit status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.6wwpLeosFlowMIBWWP-LEOS-FLOW-MIB
1.3.6.1.4.1.6141.2.60.6.1wwpLeosFlowMIBObjectsWWP-LEOS-FLOW-MIB
1.3.6.1.4.1.6141.2.60.6.1.1wwpLeosFlowWWP-LEOS-FLOW-MIB
1.3.6.1.4.1.6141.2.60.6.1.1.41wwpLeosFlowBurstConfigBacklogLimitWWP-LEOS-FLOW-MIB