All MIBs › WWP-LEOS-EXT-LAG-MIB › wwpLeosExtLagProtectionRevertState
wwpLeosExtLagProtectionRevertState
Module: WWP-LEOS-EXT-LAG-MIB
OID (symbolic): WWP-LEOS-EXT-LAG-MIB::wwpLeosExtLagProtectionRevertState
OID (numeric): 1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies that if the primary port goes from operationally disabled to operationally enabled it shall become active, and one of the secondary ports shall become backup if this MIB object is set to 'on' and the wwpLeosLagProtectionRevertTimer timer expires.
What is wwpLeosExtLagProtectionRevertState?
This field controls whether the LAG automatically reverts back to a restored primary port as active once it comes back up and the revert timer expires. Admins turn this on to prefer a designated primary port automatically resuming its active role after recovering from a failure, rather than staying on the current active port indefinitely. For example, setting wwpLeosExtLagProtectionRevertState to on(1) causes the LAG to automatically switch back to the primary port once it's restored and the configured revert timer elapses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6 snmpwalk -v2c -c public <target> WWP-LEOS-EXT-LAG-MIB::wwpLeosExtLagProtectionRevertState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6.1 snmpget -v2c -c public <target> WWP-LEOS-EXT-LAG-MIB::wwpLeosExtLagProtectionRevertState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wwpLeosExtLagProtectionRevertState.1
Start monitoring Ciena (World Wide Packets LEOS) carrier Ethernet switches (LAG protection-revert/hash-mode config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-EXT-LAG-MIB::wwpLeosExtLagProtectionRevertState OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets LEOS) carrier Ethernet switches (LAG protection-revert/hash-mode config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.14 | wwpLeosExtLagMIB | WWP-LEOS-EXT-LAG-MIB |
| 1.3.6.1.4.1.6141.2.60.14.1 | wwpLeosExtLagMIBObjects | WWP-LEOS-EXT-LAG-MIB |
| 1.3.6.1.4.1.6141.2.60.14.1.1 | wwpLeosExtLag | WWP-LEOS-EXT-LAG-MIB |
| 1.3.6.1.4.1.6141.2.60.14.1.1.3 | wwpLeosExtLagTable | WWP-LEOS-EXT-LAG-MIB |
| 1.3.6.1.4.1.6141.2.60.14.1.1.3.1 | wwpLeosExtLagEntry | WWP-LEOS-EXT-LAG-MIB |
| 1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6 | wwpLeosExtLagProtectionRevertState | WWP-LEOS-EXT-LAG-MIB |