All MIBs › WWP-LEOS-BROADCAST-CONTAINMENT-MIB › wwpLeosBroadcastContainmentCapability
wwpLeosBroadcastContainmentCapability
Module: WWP-LEOS-BROADCAST-CONTAINMENT-MIB
OID (symbolic): WWP-LEOS-BROADCAST-CONTAINMENT-MIB::wwpLeosBroadcastContainmentCapability
OID (numeric): 1.3.6.1.4.1.6141.2.60.8.1.1
Node type: OBJECT-TYPE
Type: WwpLeosBroadcastContainmentCapabilitiesMap
Access: read-only
Description: It shows which of the following (wwpLeosBroadcastContainmentPortId or wwpLeosBroadcastContainmentVlanId or both) can be used as an index in wwpLeosBroadcastContainmentFilterMemTable. If bit 0 of the bit mask (starting from right to left) is set to 1 then wwpLeosBroadcastContainmentVlanId can be used as index. If bit 1 of the bit mask is set to 1 then wwpLeosBroadcastContainmentPortId can be used as index. If both bits are set to 1 then both can be used as index.
What is wwpLeosBroadcastContainmentCapability?
This is a bit mask reporting which index types, VLAN ID, port ID, or both, this device supports for entries in the broadcast containment filter membership table: bit 0 set means VLAN ID can be used as an index, and bit 1 set means port ID can be used. Admins check this before configuring filter membership entries to know whether they can bind a filter to a VLAN, a port, or either. A capability value with both bits set tells the admin this device supports filter membership indexed by either VLAN ID or port ID.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.8.1.1 snmpwalk -v2c -c public <target> WWP-LEOS-BROADCAST-CONTAINMENT-MIB::wwpLeosBroadcastContainmentCapability
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.8.1.1.1 snmpget -v2c -c public <target> WWP-LEOS-BROADCAST-CONTAINMENT-MIB::wwpLeosBroadcastContainmentCapability.1
Start monitoring Ciena (WWP) LEOS-based Ethernet switch (per-port broadcast-rate threshold/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-BROADCAST-CONTAINMENT-MIB::wwpLeosBroadcastContainmentCapability OID value, configure state conditions and alerts, and monitor any Ciena (WWP) LEOS-based Ethernet switch (per-port broadcast-rate threshold/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.8 | wwpLeosBroadcastContainmentMIB | WWP-LEOS-BROADCAST-CONTAINMENT-MIB |
| 1.3.6.1.4.1.6141.2.60.8.1 | wwpLeosBroadcastContainmentMIBObjects | WWP-LEOS-BROADCAST-CONTAINMENT-MIB |
| 1.3.6.1.4.1.6141.2.60.8.1.1 | wwpLeosBroadcastContainmentCapability | WWP-LEOS-BROADCAST-CONTAINMENT-MIB |