All MIBs › WWP-LEOS-BLADE-MIB › wwpLeosBladeOperState
wwpLeosBladeOperState
Module: WWP-LEOS-BLADE-MIB
OID (symbolic): WWP-LEOS-BLADE-MIB::wwpLeosBladeOperState
OID (numeric): 1.3.6.1.4.1.6141.2.60.1.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The object indicates the operational state of the blade. If the blade is detected and the administrative state for that blade is enabled, then the operational state of the blade is 'enabled'. If the blade is detected, but the administrative state is 'disabled', then the operational state is also 'disabled'. A faulted state occurs when a fault or communication failure is detected on a that is in either the 'enabled' or 'disabled' operation state. Any time a blade is removed, then the blade state transitions to 'unequipped'. If a new blade replaces that blade state then the state is determined by its administrative state once it is detected ('enabled' or 'disabled').
What is wwpLeosBladeOperState?
This enumerated value reports the operational state of a blade: init(1), enabled(2), disabled(3), faulted(4), or unequipped(5). An admin monitors it to see the blade's real-world status, which tracks its administrative state when healthy but flips to faulted(4) on a detected fault or communication failure, or to unequipped(5) when the blade is physically removed. For example, if a fault or comms failure occurs on a blade currently enabled, this value transitions to faulted(4), prompting the admin to investigate or replace the card.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.1.1.1.1.1.5 snmpwalk -v2c -c public <target> WWP-LEOS-BLADE-MIB::wwpLeosBladeOperState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.1.1.1.1.1.5.1 snmpget -v2c -c public <target> WWP-LEOS-BLADE-MIB::wwpLeosBladeOperState.1
Start monitoring Ciena LEOS chassis switch, World Wide Packets modular Carrier Ethernet switch (per-blade hardware-version/oper-state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-BLADE-MIB::wwpLeosBladeOperState OID value, configure state conditions and alerts, and monitor any Ciena LEOS chassis switch, World Wide Packets modular Carrier Ethernet switch (per-blade hardware-version/oper-state status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.1 | wwpLeosBladeMIB | WWP-LEOS-BLADE-MIB |
| 1.3.6.1.4.1.6141.2.60.1.1 | wwpLeosBladeMIBObjects | WWP-LEOS-BLADE-MIB |
| 1.3.6.1.4.1.6141.2.60.1.1.1 | wwpLeosBlade | WWP-LEOS-BLADE-MIB |
| 1.3.6.1.4.1.6141.2.60.1.1.1.1 | wwpLeosBladeTable | WWP-LEOS-BLADE-MIB |
| 1.3.6.1.4.1.6141.2.60.1.1.1.1.1 | wwpLeosBladeEntry | WWP-LEOS-BLADE-MIB |
| 1.3.6.1.4.1.6141.2.60.1.1.1.1.1.5 | wwpLeosBladeOperState | WWP-LEOS-BLADE-MIB |