All MIBs › WWP-IGMP-SNOOP-MIB › wwpIgmpSnoopInqLeaveTimeout
wwpIgmpSnoopInqLeaveTimeout
Module: WWP-IGMP-SNOOP-MIB
OID (symbolic): WWP-IGMP-SNOOP-MIB::wwpIgmpSnoopInqLeaveTimeout
OID (numeric): 1.3.6.1.4.1.6141.2.10.1.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The interval of time in units of 0.1 ( tenth ) seconds for which the Group Specific Query, is allowed to wait for any response. The inquisitive leave timer is started only when the wwpIgmpSnoopLeaveMode is set to 'inquisitive(2)'.
What is wwpIgmpSnoopInqLeaveTimeout?
This object sets, in tenths of a second and defaulting to 20 (2.0 seconds), how long the switch waits for a response to a Group-Specific Query sent after a leave message, when wwpIgmpSnoopLeaveMode is set to inquisitive(2); the timer only runs in that mode. An admin tunes this to balance how quickly a stream is pruned in inquisitive mode against giving remaining members enough time to respond to the query. For example, an admin might increase this timeout slightly if remote hosts are consistently slow to respond to Group-Specific Queries, causing streams to be pruned prematurely with the shorter default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.10.1.1.11 snmpwalk -v2c -c public <target> WWP-IGMP-SNOOP-MIB::wwpIgmpSnoopInqLeaveTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.10.1.1.11.1 snmpget -v2c -c public <target> WWP-IGMP-SNOOP-MIB::wwpIgmpSnoopInqLeaveTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.10.1.1.11.1 i <value>
Start monitoring World Wide Packets Ethernet access/aggregation switch (IGMP querier/multicast-forwarding status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-IGMP-SNOOP-MIB::wwpIgmpSnoopInqLeaveTimeout OID value, configure state conditions and alerts, and monitor any World Wide Packets Ethernet access/aggregation switch (IGMP querier/multicast-forwarding status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.10 | wwpIgmpSnoopMIB | WWP-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.10.1 | wwpIgmpSnoopMIBObjects | WWP-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.10.1.1 | wwpIgmpSnoop | WWP-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.10.1.1.11 | wwpIgmpSnoopInqLeaveTimeout | WWP-IGMP-SNOOP-MIB |