All MIBs › WWP-GENERIC-IGMP-SNOOP-MIB › wwpGenIgmpSnoopLeaveMode
wwpGenIgmpSnoopLeaveMode
Module: WWP-GENERIC-IGMP-SNOOP-MIB
OID (symbolic): WWP-GENERIC-IGMP-SNOOP-MIB::wwpGenIgmpSnoopLeaveMode
OID (numeric): 1.3.6.1.4.1.6141.2.19.1.1.9.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting the igmp leave mode to 'fast(1)' will cause the multicast stream to be pruned as soon as a leave is received. If this object is set to 'inquisitive(2)', then a Group Specific Query is created for the multicast stream for which the leave was received. If no membership report is received in the time interval configured by the wwpGenIgmpSnoopInqLeaveTimeout, then the multicast stream is pruned.
What is wwpGenIgmpSnoopLeaveMode?
Sets the IGMP leave handling mode to fast(1), which prunes a multicast stream immediately upon receiving a leave, or inquisitive(2), which sends a Group Specific Query first and only prunes if no membership report arrives within wwpGenIgmpSnoopInqLeaveTimeout. An admin chooses fast mode for quicker pruning on networks with one receiver per port, or inquisitive mode to avoid prematurely cutting off other receivers still on a shared segment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.19.1.1.9.1.4 snmpwalk -v2c -c public <target> WWP-GENERIC-IGMP-SNOOP-MIB::wwpGenIgmpSnoopLeaveMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.19.1.1.9.1.4.1 snmpget -v2c -c public <target> WWP-GENERIC-IGMP-SNOOP-MIB::wwpGenIgmpSnoopLeaveMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.19.1.1.9.1.4.1 i <value>
Start monitoring World Wide Packets / Ciena LEOS Metro Ethernet device (IGMP-snooping leave-mode/group-membership status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-GENERIC-IGMP-SNOOP-MIB::wwpGenIgmpSnoopLeaveMode OID value, configure state conditions and alerts, and monitor any World Wide Packets / Ciena LEOS Metro Ethernet device (IGMP-snooping leave-mode/group-membership status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.19 | wwpGenIgmpSnoopMIB | WWP-GENERIC-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.19.1 | wwpGenIgmpSnoopMIBObjects | WWP-GENERIC-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.19.1.1 | wwpGenIgmpSnoop | WWP-GENERIC-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.19.1.1.9 | wwpGenExtIgmpSnoopActEntryTable | WWP-GENERIC-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.19.1.1.9.1 | wwpGenExtIgmpSnoopActEntry | WWP-GENERIC-IGMP-SNOOP-MIB |
| 1.3.6.1.4.1.6141.2.19.1.1.9.1.4 | wwpGenIgmpSnoopLeaveMode | WWP-GENERIC-IGMP-SNOOP-MIB |