WS-SW-IGMP-SNOOP-MIB :: wsSwIgmpSnoopQuerierIPAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WS-SW-IGMP-SNOOP-MIB › wsSwIgmpSnoopQuerierIPAddress

wsSwIgmpSnoopQuerierIPAddress

Module: WS-SW-IGMP-SNOOP-MIB

OID (symbolic): WS-SW-IGMP-SNOOP-MIB::wsSwIgmpSnoopQuerierIPAddress

OID (numeric): 1.3.6.1.4.1.388.14.2.17.1.1.3.1.6

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The source IP Address used by the querier while generating the IGMP queries. By default this is zero. If the querier is enabled and it's IP address is not configured then switch will try to the following IP address in the given prefrence: 1. Use the Querier global default IP address. 2. use the corresponding SVI IP. 3. Try to use the first occurring IP address among all the interfaces. If none of the above has been configured for an IP address then it will not send send out the query.

What is wsSwIgmpSnoopQuerierIPAddress?

The source IP address used by this VLAN's querier when generating queries; if left at the default 0.0.0.0, the switch falls back in order to the global default querier address, then the VLAN's SVI IP, then the first IP found on any interface, and sends no query at all if none is available.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.388.14.2.17.1.1.3.1.6
snmpwalk -v2c -c public <target> WS-SW-IGMP-SNOOP-MIB::wsSwIgmpSnoopQuerierIPAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.388.14.2.17.1.1.3.1.6.1
snmpget -v2c -c public <target> WS-SW-IGMP-SNOOP-MIB::wsSwIgmpSnoopQuerierIPAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.388.14.2.17.1.1.3.1.6.1 a <value>

Start monitoring Symbol Technologies wireless switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WS-SW-IGMP-SNOOP-MIB::wsSwIgmpSnoopQuerierIPAddress OID value, configure state conditions and alerts, and monitor any Symbol Technologies wireless switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.388symbolSYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB
1.3.6.1.4.1.388.14wsWS-SMI
1.3.6.1.4.1.388.14.2wsSwWS-SMI
1.3.6.1.4.1.388.14.2.17wsSwIgmpSnoopWS-SW-SMI
Numeric OIDNameModule
1.3.6.1.4.1.388.14.2.17.1wsSwIgmpSnoopMibModuleWS-SW-IGMP-SNOOP-MIB
1.3.6.1.4.1.388.14.2.17.1.1wsSwIgmpSnoopMIBWS-SW-IGMP-SNOOP-MIB
1.3.6.1.4.1.388.14.2.17.1.1.3wsSwIgmpSnoopQuerierTableWS-SW-IGMP-SNOOP-MIB
1.3.6.1.4.1.388.14.2.17.1.1.3.1wsSwIgmpSnoopQuerierEntryWS-SW-IGMP-SNOOP-MIB
1.3.6.1.4.1.388.14.2.17.1.1.3.1.6wsSwIgmpSnoopQuerierIPAddressWS-SW-IGMP-SNOOP-MIB