All MIBs › WIPIPE-MIB › devGpioReadOutput
devGpioReadOutput
Module: WIPIPE-MIB
OID (symbolic): WIPIPE-MIB::devGpioReadOutput
OID (numeric): 1.3.6.1.4.1.20992.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Read the Output GPIO value on the connector. 0 - low. 1 - high. @SET-FUNC=snmp_set_devGpioReadOutput @GET-FUNC=snmp_get_devGpioReadOutput
What is devGpioReadOutput?
Current logic level (0=low, 1=high) read back from the router's output GPIO connector, letting an admin confirm the output actually matches what devGpioConfigOutput was set to drive.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20992.1.1.8 snmpwalk -v2c -c public <target> WIPIPE-MIB::devGpioReadOutput
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20992.1.1.8.1 snmpget -v2c -c public <target> WIPIPE-MIB::devGpioReadOutput.1
Start monitoring WiPipe cellular router, M2M/IoT cellular gateway (firmware-upgrade/GPIO-alarm/modem-table status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIPIPE-MIB::devGpioReadOutput OID value, configure state conditions and alerts, and monitor any WiPipe cellular router, M2M/IoT cellular gateway (firmware-upgrade/GPIO-alarm/modem-table status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20992 | wipipe | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1 | wipipeMgmt | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1.1 | wipipeDevice | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1.1.8 | devGpioReadOutput | WIPIPE-MIB |