All MIBs › WIPIPE-MIB › devFWUpgradeURL
devFWUpgradeURL
Module: WIPIPE-MIB
OID (symbolic): WIPIPE-MIB::devFWUpgradeURL
OID (numeric): 1.3.6.1.4.1.20992.1.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Set the URL that points to the firmware image that will be used when doing a manual firmware upgrade. @SET-FUNC=snmp_set_devFWUpgradeURL @GET-FUNC=snmp_get_devFWUpgradeURL
What is devFWUpgradeURL?
URL pointing to the firmware image to use for a manual firmware upgrade, consulted only when devFWUpgrade is set to manual.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20992.1.1.3 snmpwalk -v2c -c public <target> WIPIPE-MIB::devFWUpgradeURL
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20992.1.1.3.1 snmpget -v2c -c public <target> WIPIPE-MIB::devFWUpgradeURL.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.20992.1.1.3.1 s <value>
Start monitoring WiPipe cellular router, M2M/IoT cellular gateway (firmware-upgrade/GPIO-alarm/modem-table status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIPIPE-MIB::devFWUpgradeURL OID value, configure state conditions and alerts, and monitor any WiPipe cellular router, M2M/IoT cellular gateway (firmware-upgrade/GPIO-alarm/modem-table status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20992 | wipipe | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1 | wipipeMgmt | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1.1 | wipipeDevice | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1.1.3 | devFWUpgradeURL | WIPIPE-MIB |