All MIBs › WIPIPE-MIB › devFWUpgrade
devFWUpgrade
Module: WIPIPE-MIB
OID (symbolic): WIPIPE-MIB::devFWUpgrade
OID (numeric): 1.3.6.1.4.1.20992.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Initiate a FW upgrade on the device. none - No upgrade is being performed or initiated. auto - If no other upgrade is begin performed, when this value is written then an automatic upgrade will be performed. When an automatic upgrade is done then the device will pull the most current FW image from the Wipipe server and install it. If this value is read then the router is performing an automatic upgrade and the devFWUpgradeStatus object should be read for further information. manual - If no other upgrade is begin performed, when this value is written then a manual upgrade will be performed. When an manual upgrade is done it will use the URL set in the devFWUpgradeURL object as the place to get the firmware image and install. If the devFWUpgradeURL object is not set then no upgrade will be performed. If this value is read then the router is performing an manual upgrade and the devFWUpgradeStatus object should be read for further information. - @SET-FUNC=snmp_set_devFWUpgrade @GET-FUNC=snmp_get_devFWUpgrade
What is devFWUpgrade?
Initiates a firmware upgrade on the device when set: auto triggers the router to pull and install the latest firmware from CradlePoint's WiPipe server, manual triggers an install from the URL configured in devFWUpgradeURL (and does nothing if that URL isn't set); reading it back while an upgrade is running tells you which mode is in progress, with devFWUpgradeStatus giving the detailed progress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20992.1.1.2 snmpwalk -v2c -c public <target> WIPIPE-MIB::devFWUpgrade
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20992.1.1.2.1 snmpget -v2c -c public <target> WIPIPE-MIB::devFWUpgrade.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.20992.1.1.2.1 i <value>
Start monitoring WiPipe cellular router, M2M/IoT cellular gateway (firmware-upgrade/GPIO-alarm/modem-table status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIPIPE-MIB::devFWUpgrade OID value, configure state conditions and alerts, and monitor any WiPipe cellular router, M2M/IoT cellular gateway (firmware-upgrade/GPIO-alarm/modem-table status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20992 | wipipe | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1 | wipipeMgmt | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1.1 | wipipeDevice | WIPIPE-MIB |
| 1.3.6.1.4.1.20992.1.1.2 | devFWUpgrade | WIPIPE-MIB |