All MIBs › WAN-OPT-MIB › cdx6500WACfgParallelPort
cdx6500WACfgParallelPort
Module: WAN-OPT-MIB
OID (symbolic): WAN-OPT-MIB::cdx6500WACfgParallelPort
OID (numeric): 1.3.6.1.4.1.449.2.1.2.2.16.1.21
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: This parameter specifies the port that Parallel SVCs should be brought up over. The parameter can be in two forms. It can be in the form of a port identifier string. For example, to bring Parallel SVCs up over X25 port number 8, enter the string X25-8. It can also be in the form of a Switched Services Table destination name, if the port that the Parallel SVCs are to come up over is a dial on demand port. A value of (blank) will cause Parallel SVCs to be brought up over the same port as the main connection.
What is cdx6500WACfgParallelPort?
This read-only string specifies which port parallel SVCs come up over, either a port identifier like 'X25-8' or a Switched Services Table destination name, with a blank value meaning parallel SVCs use the same port as the main connection. Set it to a distinct port identifier when parallel SVC traffic needs to be routed over separate physical WAN capacity from the main circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.16.1.21 snmpwalk -v2c -c public <target> WAN-OPT-MIB::cdx6500WACfgParallelPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.16.1.21.1 snmpget -v2c -c public <target> WAN-OPT-MIB::cdx6500WACfgParallelPort.1
Start monitoring WAN optimization/acceleration appliance, CDX6500-class (compression-ratio/dedup/throughput status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WAN-OPT-MIB::cdx6500WACfgParallelPort OID value, configure state conditions and alerts, and monitor any WAN optimization/acceleration appliance, CDX6500-class (compression-ratio/dedup/throughput status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2 | cdx6500CfgGeneralGroup | CDX-6500-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.2.16 | cdx6500GCTLANConnectionTable | WAN-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.16.1 | cdx6500GCTLANConnectionEntry | WAN-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.16.1.21 | cdx6500WACfgParallelPort | WAN-OPT-MIB |