All MIBs › Vct-Loopdetect-59-MIB › vctSetIfindex
vctSetIfindex
Module: Vct-Loopdetect-59-MIB
OID (symbolic): Vct-Loopdetect-59-MIB::vctSetIfindex
OID (numeric): 1.3.6.1.4.1.3902.3.102.24.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The ifindex of port, which need to be checked.
What is vctSetIfindex?
This read-write flag, keyed per port via the table's vctIfindex, enables or disables running the virtual cable test (VCT) diagnostic check on that port. Admins set it to enable(1) to trigger a cable diagnostic sweep on a given port when they suspect a wiring fault, then read the resulting cableStatus and cable-pair fields. Setting vctSetIfindex to enable(1) on a port showing intermittent link flaps starts a VCT scan to check for a bad or mismatched cable pair.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.24.1.1.2 snmpwalk -v2c -c public <target> Vct-Loopdetect-59-MIB::vctSetIfindex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.24.1.1.2.1 snmpget -v2c -c public <target> Vct-Loopdetect-59-MIB::vctSetIfindex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.102.24.1.1.2.1 i <value>
Start monitoring access-layer Ethernet switch (per-port loop-detection/cable-parameter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Vct-Loopdetect-59-MIB::vctSetIfindex OID value, configure state conditions and alerts, and monitor any access-layer Ethernet switch (per-port loop-detection/cable-parameter status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.24 | switch59vct | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.24.1 | vctTable | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.24.1.1 | vctEntry | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.24.1.1.2 | vctSetIfindex | Vct-Loopdetect-59-MIB |