All MIBs › Vct-Loopdetect-59-MIB › loopdetectPortVid
loopdetectPortVid
Module: Vct-Loopdetect-59-MIB
OID (symbolic): Vct-Loopdetect-59-MIB::loopdetectPortVid
OID (numeric): 1.3.6.1.4.1.3902.3.102.25.2.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The vlan which the loopdetect port belong to.
What is loopdetectPortVid?
This object records the VLAN or VLANs associated with the port for loop-detection purposes, encoded as an octet string. Admins use it to scope loop detection to specific VLANs on a trunk port, rather than treating the whole port as a single loop domain. Setting this to identify VLAN 10 would have the switch run loop detection against traffic on that VLAN specifically for this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.25.2.1.4 snmpwalk -v2c -c public <target> Vct-Loopdetect-59-MIB::loopdetectPortVid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.25.2.1.4.1 snmpget -v2c -c public <target> Vct-Loopdetect-59-MIB::loopdetectPortVid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.102.25.2.1.4.1 s <value>
Start monitoring access-layer Ethernet switch (per-port loop-detection/cable-parameter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Vct-Loopdetect-59-MIB::loopdetectPortVid OID value, configure state conditions and alerts, and monitor any access-layer Ethernet switch (per-port loop-detection/cable-parameter status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25 | switch59loopdetect | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25.2 | loopdetectTable | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25.2.1 | loopdetectEntry | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25.2.1.4 | loopdetectPortVid | Vct-Loopdetect-59-MIB |