All MIBs › Vct-Loopdetect-59-MIB › loopdetectPortControl
loopdetectPortControl
Module: Vct-Loopdetect-59-MIB
OID (symbolic): Vct-Loopdetect-59-MIB::loopdetectPortControl
OID (numeric): 1.3.6.1.4.1.3902.3.102.25.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The loopdetect protocol enable/disable.
What is loopdetectPortControl?
This read-write flag enables or disables the loop-detection protocol on this specific port. Admins disable it on ports that are intentionally bridged or connected to test equipment where a loop is expected and shouldn't trigger shutdown, while leaving it enabled on normal access ports. Setting this to disable(0) on a port used for an intentional network loopback test prevents the switch from erroneously shutting that port down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.25.2.1.3 snmpwalk -v2c -c public <target> Vct-Loopdetect-59-MIB::loopdetectPortControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.25.2.1.3.1 snmpget -v2c -c public <target> Vct-Loopdetect-59-MIB::loopdetectPortControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.102.25.2.1.3.1 i <value>
Start monitoring access-layer Ethernet switch (per-port loop-detection/cable-parameter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Vct-Loopdetect-59-MIB::loopdetectPortControl OID value, configure state conditions and alerts, and monitor any access-layer Ethernet switch (per-port loop-detection/cable-parameter status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25 | switch59loopdetect | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25.2 | loopdetectTable | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25.2.1 | loopdetectEntry | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.25.2.1.3 | loopdetectPortControl | Vct-Loopdetect-59-MIB |