VIVOE-MIB :: videoFormatStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVIVOE-MIBvideoFormatStatus

videoFormatStatus

Module: VIVOE-MIB

OID (symbolic): VIVOE-MIB::videoFormatStatus

OID (numeric): 1.3.6.1.4.1.35990.3.1.2.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object denotes whether the video format described in this entry in the table is currently enabled or disabled. The status types defined are: 1 - Enabled denotes that the video format can be used by a channel without the device needing to be reset or rebooted. A channel can therefore simply be set-up to start transmitting or receiving this video format by a manager. 2 - Disabled denotes that to use this video format the device will need to be reset or rebooted after a manager has set a channel to use the format. The channel video format shall be set using the channelVideoFormatIndex object. The device shall be reset or rebooted using either the deviceReset or channelReset objects, as appropriate. The status and performance of the channel cannot be guaranteed after it has been set to this video format until a reset or reboot has been undertaken.

What is videoFormatStatus?

Indicates whether a preset video format can be activated immediately (enabled) or requires a device reset/reboot first (disabled). Admins watch for disabled entries before assigning them to a channel, since the channel's behavior isn't guaranteed until the required reset has been performed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35990.3.1.2.2.1.3
snmpwalk -v2c -c public <target> VIVOE-MIB::videoFormatStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.35990.3.1.2.2.1.3.1
snmpget -v2c -c public <target> VIVOE-MIB::videoFormatStatus.1

Start monitoring military vehicle video-over-Ethernet endpoint, vetronics architecture (video-endpoint link/stream config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VIVOE-MIB::videoFormatStatus OID value, configure state conditions and alerts, and monitor any military vehicle video-over-Ethernet endpoint, vetronics architecture (video-endpoint link/stream config status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.35990desleVIVOE-MIB
1.3.6.1.4.1.35990.3desleProductsVIVOE-MIB
1.3.6.1.4.1.35990.3.1vivoeMIBVIVOE-MIB
1.3.6.1.4.1.35990.3.1.2videoFormatInfoVIVOE-MIB
1.3.6.1.4.1.35990.3.1.2.2videoFormatTableVIVOE-MIB
1.3.6.1.4.1.35990.3.1.2.2.1videoFormatEntryVIVOE-MIB
1.3.6.1.4.1.35990.3.1.2.2.1.3videoFormatStatusVIVOE-MIB