VIVOE-MIB :: channelReceiveIpAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVIVOE-MIBchannelReceiveIpAddress

channelReceiveIpAddress

Module: VIVOE-MIB

OID (symbolic): VIVOE-MIB::channelReceiveIpAddress

OID (numeric): 1.3.6.1.4.1.35990.3.1.3.3.1.21

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: For a service user channel this object is the multicast IP address to receive RTP encoded video or data on and can be changed to select a new RTP stream. A service user channel shall not start processing the stream (or join the relevant multicast group) until it is re-started using the channelStatus object unless it is in the default start-up mode. If a service user channel is not currently receiving a stream or the channel is a service provider channel or ROI the value shall be null or 0.0.0.0.

What is channelReceiveIpAddress?

For a service-user channel, the multicast IP address it receives RTP video/data on; null or 0.0.0.0 if the channel is idle or is a service provider. Admins change this to point a receiving channel at a different multicast video stream, then restart the channel via channelStatus to pick up the new address.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35990.3.1.3.3.1.21
snmpwalk -v2c -c public <target> VIVOE-MIB::channelReceiveIpAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.35990.3.1.3.3.1.21.1
snmpget -v2c -c public <target> VIVOE-MIB::channelReceiveIpAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.35990.3.1.3.3.1.21.1 a <value>

Start monitoring military vehicle video-over-Ethernet endpoint, vetronics architecture (video-endpoint link/stream config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VIVOE-MIB::channelReceiveIpAddress OID value, configure state conditions and alerts, and monitor any military vehicle video-over-Ethernet endpoint, vetronics architecture (video-endpoint link/stream config status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.35990desleVIVOE-MIB
1.3.6.1.4.1.35990.3desleProductsVIVOE-MIB
1.3.6.1.4.1.35990.3.1vivoeMIBVIVOE-MIB
1.3.6.1.4.1.35990.3.1.3channelControlVIVOE-MIB
1.3.6.1.4.1.35990.3.1.3.3channelTableVIVOE-MIB
1.3.6.1.4.1.35990.3.1.3.3.1channelEntryVIVOE-MIB
1.3.6.1.4.1.35990.3.1.3.3.1.21channelReceiveIpAddressVIVOE-MIB