VERTICALT1-E1-MIB :: vdsx1TrunkRedLED

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVERTICALT1-E1-MIBvdsx1TrunkRedLED

vdsx1TrunkRedLED

Module: VERTICALT1-E1-MIB

OID (symbolic): VERTICALT1-E1-MIB::vdsx1TrunkRedLED

OID (numeric): 1.3.6.1.4.1.2338.3.2.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Specifies the RED LED status of the trunk OFF = 0, ON = 1.

What is vdsx1TrunkRedLED?

This read-only value reports the state of the trunk's RED LED (0=OFF, 1=ON), which lights to indicate a Loss of Signal (LOS) condition, the same alarm reported by the vdsx1TrunkRed trap. An admin polls this to check a trunk's alarm state programmatically instead of physically inspecting the card's LEDs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2338.3.2.1.20
snmpwalk -v2c -c public <target> VERTICALT1-E1-MIB::vdsx1TrunkRedLED

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2338.3.2.1.20.1
snmpget -v2c -c public <target> VERTICALT1-E1-MIB::vdsx1TrunkRedLED.1

Start monitoring Vertical Networks T1/E1 trunk interface cards (framing/alarm/errored-second status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VERTICALT1-E1-MIB::vdsx1TrunkRedLED OID value, configure state conditions and alerts, and monitor any Vertical Networks T1/E1 trunk interface cards (framing/alarm/errored-second status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2338verticalVERTICAL-EVENTLOG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2338.3vds1VERTICALT1-E1-MIB
1.3.6.1.4.1.2338.3.2vdsx1TrunkTableVERTICALT1-E1-MIB
1.3.6.1.4.1.2338.3.2.1vdsx1TrunkEntryVERTICALT1-E1-MIB
1.3.6.1.4.1.2338.3.2.1.20vdsx1TrunkRedLEDVERTICALT1-E1-MIB