All MIBs › VDSL-LINE-MIB › vdslChanInterleaveDelay
vdslChanInterleaveDelay
Module: VDSL-LINE-MIB
OID (symbolic): VDSL-LINE-MIB::vdslChanInterleaveDelay
OID (numeric): 1.3.6.1.2.1.10.97.1.1.3.1.1
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: Interleave Delay for this channel.
Interleave delay applies only to the interleave (slow) channel and defines the mapping (relative spacing) between subsequent input bytes at the
interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
In the case where the ifType is fast(125), return a value of zero.
What is vdslChanInterleaveDelay?
Reports the interleave delay configured for this (necessarily interleaved/slow) channel, i.e. how far apart in the bitstream consecutive input bytes get spread to survive impulse noise; a fast-channel instance always reads zero. Higher values trade more payload latency for better protection against bursts of noise, so this number matters when the line carries delay-sensitive traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.97.1.1.3.1.1 snmpwalk -v2c -c public <target> VDSL-LINE-MIB::vdslChanInterleaveDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.97.1.1.3.1.1.1 snmpget -v2c -c public <target> VDSL-LINE-MIB::vdslChanInterleaveDelay.1
Start monitoring vendor-neutral, standards-based MIB, DSLAMs and VDSL modems/transceivers (line coding/profile/transceiver-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VDSL-LINE-MIB::vdslChanInterleaveDelay OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, DSLAMs and VDSL modems/transceivers (line coding/profile/transceiver-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.97 | vdslMIB | VDSL-LINE-MIB |
| 1.3.6.1.2.1.10.97.1 | vdslLineMib | VDSL-LINE-MIB |
| 1.3.6.1.2.1.10.97.1.1 | vdslMibObjects | VDSL-LINE-MIB |
| 1.3.6.1.2.1.10.97.1.1.3 | vdslChanTable | VDSL-LINE-MIB |
| 1.3.6.1.2.1.10.97.1.1.3.1 | vdslChanEntry | VDSL-LINE-MIB |
| 1.3.6.1.2.1.10.97.1.1.3.1.1 | vdslChanInterleaveDelay | VDSL-LINE-MIB |