All MIBs › Unisphere-Data-SUBSCRIBER-MIB › usdSubscrLocalName
usdSubscrLocalName
Module: Unisphere-Data-SUBSCRIBER-MIB
OID (symbolic): Unisphere-Data-SUBSCRIBER-MIB::usdSubscrLocalName
OID (numeric): 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The subscriber's name.
If usdSubscrLocalNamePrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber name. The full name is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber.
What is usdSubscrLocalName?
This read-write DisplayString (up to 31 characters) holds the subscriber's name for this locally-configured entry, used in cases where the remote subscriber's identity can't be queried directly, such as dynamic IPoA. An admin configures it either as a full subscriber name or, if usdSubscrLocalNamePrefix is enabled, as a prefix the device extends with local port/slot information. Setting usdSubscrLocalName to a specific customer identifier ties this interface's traffic to that subscriber for RADIUS authentication purposes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5 snmpwalk -v2c -c public <target> Unisphere-Data-SUBSCRIBER-MIB::usdSubscrLocalName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5.1 snmpget -v2c -c public <target> Unisphere-Data-SUBSCRIBER-MIB::usdSubscrLocalName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5.1 s <value>
Start monitoring Juniper/Unisphere ERX broadband edge router (subscriber authentication/domain-assignment status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-SUBSCRIBER-MIB::usdSubscrLocalName OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX broadband edge router (subscriber authentication/domain-assignment status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.49 | juniSubscriberMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.49.1 | usdSubscrObjects | Unisphere-Data-SUBSCRIBER-MIB |
| 1.3.6.1.4.1.4874.2.2.49.1.1 | usdSubscrLocal | Unisphere-Data-SUBSCRIBER-MIB |
| 1.3.6.1.4.1.4874.2.2.49.1.1.1 | usdSubscrLocalTable | Unisphere-Data-SUBSCRIBER-MIB |
| 1.3.6.1.4.1.4874.2.2.49.1.1.1.1 | usdSubscrLocalEntry | Unisphere-Data-SUBSCRIBER-MIB |
| 1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5 | usdSubscrLocalName | Unisphere-Data-SUBSCRIBER-MIB |