All MIBs › Unisphere-Data-PPP-PROFILE-MIB › usdPppProfilePassiveMode
usdPppProfilePassiveMode
Module: Unisphere-Data-PPP-PROFILE-MIB
OID (symbolic): Unisphere-Data-PPP-PROFILE-MIB::usdPppProfilePassiveMode
OID (numeric): 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13
Node type: OBJECT-TYPE
Type: UsdEnable
Access: read-write
Description: When enabled, LCP state machine is forced into passive mode on lower layer UP message. It adds compatibility with slow and buggy clients.
What is usdPppProfilePassiveMode?
This object, when enabled, forces the PPP LCP state machine into passive mode as soon as the lower layer comes up, waiting for the peer to initiate negotiation rather than starting it locally. Admins enable this specifically to improve compatibility with slow or buggy PPP client implementations that don't handle an immediately aggressive LCP negotiation well. For example, enabling usdPppProfilePassiveMode on a dial-up access profile could resolve connection failures with older or nonstandard dial-up client software.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13 snmpwalk -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfilePassiveMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13.1 snmpget -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfilePassiveMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usdPppProfilePassiveMode.1
Start monitoring Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-PPP-PROFILE-MIB::usdPppProfilePassiveMode OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.45 | juniPppProfileMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.45.1 | juniPppProfileObjects | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1 | juniPppProfile | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1.1 | juniPppProfileTable | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1.1.1 | juniPppProfileEntry | Juniper-PPP-PROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13 | usdPppProfilePassiveMode | Unisphere-Data-PPP-PROFILE-MIB |