All MIBs › Unisphere-Data-PPP-PROFILE-MIB › usdPppProfileLcpMagicNumber
usdPppProfileLcpMagicNumber
Module: Unisphere-Data-PPP-PROFILE-MIB
OID (symbolic): Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpMagicNumber
OID (numeric): 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification.
What is usdPppProfileLcpMagicNumber?
This object controls whether the local PPP entity actively attempts LCP Magic Number negotiation with the remote peer, used to detect looped-back links; the device will still comply with negotiation the remote side initiates regardless of this setting. Admins enable this when they want the local side to proactively detect line loopbacks during PPP link setup. For example, setting usdPppProfileLcpMagicNumber to true(2) makes the local PPP entity initiate Magic Number negotiation rather than only responding if the peer proposes it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3 snmpwalk -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpMagicNumber
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3.1 snmpget -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpMagicNumber.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3.1 i <value>
Start monitoring Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpMagicNumber OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.45 | juniPppProfileMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.45.1 | juniPppProfileObjects | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1 | juniPppProfile | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1.1 | juniPppProfileTable | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1.1.1 | juniPppProfileEntry | Juniper-PPP-PROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3 | usdPppProfileLcpMagicNumber | Unisphere-Data-PPP-PROFILE-MIB |