Unisphere-Data-PPP-PROFILE-MIB :: usdPppProfileLcpKeepalive

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › Unisphere-Data-PPP-PROFILE-MIB › usdPppProfileLcpKeepalive

usdPppProfileLcpKeepalive

Module: Unisphere-Data-PPP-PROFILE-MIB

OID (symbolic): Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpKeepalive

OID (numeric): 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Keepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo.

What is usdPppProfileLcpKeepalive?

This object sets the PPP keepalive interval, in seconds, using LCP Echo Request/Reply messages to detect a dead link; a value of 0 disables keepalive entirely. Admins tune this to control how quickly a failed PPP session is detected, trading off faster detection against additional keepalive traffic. For example, setting usdPppProfileLcpKeepalive to 60 sends an LCP Echo every 60 seconds to verify the peer is still responsive, compared to the default of every 30 seconds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4
snmpwalk -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpKeepalive

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4.1
snmpget -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpKeepalive.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4.1 i <value>

Start monitoring Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpKeepalive OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.45juniPppProfileMIBJuniper-MIBs
1.3.6.1.4.1.4874.2.2.45.1juniPppProfileObjectsJuniper-PPP-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.45.1.1juniPppProfileJuniper-PPP-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.45.1.1.1juniPppProfileTableJuniper-PPP-PROFILE-MIB
1.3.6.1.4.1.4874.2.2.45.1.1.1.1juniPppProfileEntryJuniper-PPP-PROFILE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4usdPppProfileLcpKeepaliveUnisphere-Data-PPP-PROFILE-MIB