All MIBs › Unisphere-Data-PPP-PROFILE-MIB › usdPppProfileLcpInitialMRU
usdPppProfileLcpInitialMRU
Module: Unisphere-Data-PPP-PROFILE-MIB
OID (symbolic): Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpInitialMRU
OID (numeric): 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity.
If the value of this variable is 1 then the local PPP entity will advertise an MRU value determined by its underlying media interface.
What is usdPppProfileLcpInitialMRU?
This object sets the initial Maximum Receive Unit (MRU) that the local PPP entity advertises to the remote peer during LCP negotiation, with a special value of 1 telling the device to derive the MRU automatically from its underlying media interface instead of advertising a fixed value. Admins adjust this to control the largest PPP frame size the local side will accept, which can matter for interoperability with certain peer equipment. For example, leaving usdPppProfileLcpInitialMRU at its default of 1 lets the router automatically pick an appropriate MRU based on the physical interface type carrying the PPP session.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8 snmpwalk -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpInitialMRU
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8.1 snmpget -v2c -c public <target> Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpInitialMRU.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8.1 i <value>
Start monitoring Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-PPP-PROFILE-MIB::usdPppProfileLcpInitialMRU OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX broadband edge router (PPP subscriber profile-template config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.45 | juniPppProfileMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.45.1 | juniPppProfileObjects | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1 | juniPppProfile | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1.1 | juniPppProfileTable | Juniper-PPP-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.45.1.1.1.1 | juniPppProfileEntry | Juniper-PPP-PROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8 | usdPppProfileLcpInitialMRU | Unisphere-Data-PPP-PROFILE-MIB |