All MIBs › Unisphere-Data-PPP-MIB › usdPppLinkStatusTerminateReason
usdPppLinkStatusTerminateReason
Module: Unisphere-Data-PPP-MIB
OID (symbolic): Unisphere-Data-PPP-MIB::usdPppLinkStatusTerminateReason
OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Reason the PPP link was terminated: none None. other Not specified. adminDisable Interface administratively disabled. lowerLayerDown Underlying interface is down. noUpperInterface No interface above PPP. authenticationFailure Authentication failed. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate LCP option. See usdPppLinkStatusTerminateNegFailOption. keepaliveFailure Keepalive failed. sessionTimeout Maximum session period expired. inactivityTimeout Maximum inactivity period expired. addressLeaseExpired Lease for network address expired. adminLogout Session administratively terminated. tunnelFailed Associated tunnel failed. tunnelDisconnected Associated tunnel disconnected. loopback Loopback detected.
What is usdPppLinkStatusTerminateReason?
Reports why this PPP link's LCP session was last terminated -- for example administrative shutdown, lower-layer failure, authentication failure, peer-initiated termination, a keepalive or negotiation failure, a session or inactivity timeout, or an associated tunnel problem. Admins use it as the primary diagnostic field when a PPP interface unexpectedly goes down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1 snmpwalk -v2c -c public <target> Unisphere-Data-PPP-MIB::usdPppLinkStatusTerminateReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1.1 snmpget -v2c -c public <target> Unisphere-Data-PPP-MIB::usdPppLinkStatusTerminateReason.1
Start monitoring Unisphere Networks (Juniper E-series/ERX) routing switches (PPP link termination-reason/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-PPP-MIB::usdPppLinkStatusTerminateReason OID value, configure state conditions and alerts, and monitor any Unisphere Networks (Juniper E-series/ERX) routing switches (PPP link termination-reason/keepalive status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.11 | juniPppMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.11.1 | juniPppObjects | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1 | juniPppLcp | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1.1 | juniPppLinkStatusTable | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1.1.1 | juniPppLinkStatusEntry | Juniper-PPP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1 | usdPppLinkStatusTerminateReason | Unisphere-Data-PPP-MIB |