Unisphere-Data-IP-MIB :: usdIpRouteStaticStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › Unisphere-Data-IP-MIB › usdIpRouteStaticStatus

usdIpRouteStaticStatus

Module: Unisphere-Data-IP-MIB

OID (symbolic): Unisphere-Data-IP-MIB::usdIpRouteStaticStatus

OID (numeric): 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The operational status of this static route.

active(0) indicates this route is currently being used to reach the specified destination.

inactive(1) indicates this route is considered valid, but currently is superseded by another routing table entry for the destination, having a higher preference value.

incomplete(2) indicates this route entry contains information that is incomplete, or is inconsistent with other system configuration (for example, the interface specified in usdIpRouteStaticIfIndex does not exist).

What is usdIpRouteStaticStatus?

Reports the operational state of this static route: active means it is currently in use, inactive means a higher-preference route to the same destination is in use instead, and incomplete means the route's configuration is invalid, such as pointing at an interface that no longer exists.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7
snmpwalk -v2c -c public <target> Unisphere-Data-IP-MIB::usdIpRouteStaticStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7.1
snmpget -v2c -c public <target> Unisphere-Data-IP-MIB::usdIpRouteStaticStatus.1

Start monitoring Juniper/Unisphere ERX Edge Router (router-ID/VPN-ID/per-interface IP config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-IP-MIB::usdIpRouteStaticStatus OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (router-ID/VPN-ID/per-interface IP config status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.12juniIpMIBJuniper-IP-MIB
1.3.6.1.4.1.4874.2.2.12.1juniIpObjectsJuniper-IP-MIB
1.3.6.1.4.1.4874.2.2.12.1.3juniIpRouteJuniper-IP-MIB
1.3.6.1.4.1.4874.2.2.12.1.3.2juniIpRouteStaticTableJuniper-IP-MIB
1.3.6.1.4.1.4874.2.2.12.1.3.2.1juniIpRouteStaticEntryJuniper-IP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7usdIpRouteStaticStatusUnisphere-Data-IP-MIB