All MIBs › Unisphere-Data-IP-MIB › usdIpIfAssocIpIfIndex
usdIpIfAssocIpIfIndex
Module: Unisphere-Data-IP-MIB
OID (symbolic): Unisphere-Data-IP-MIB::usdIpIfAssocIpIfIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-only
Description: The ifIndex of the IP interface associated with the lower layer usdIpIfAssocLowerIfIndex. In cases where there is not a 1 to 1 relationship between lower layer and higher layer IP interface, a zero value usdIpIfAssocIpIfIndex is returned; this includes the case where an IP interface has not yet been configued at the top of the interface column.
An example usage of this table:
Assume a user needs to know the ifIndex relationship for all interfaces with the L3 IP interface.
Then starting at the bottom of the stack below, the ATM and AAL5's ifIndex would be used to access the table. The agent will return 0 for each of these cases because multiple customer's traffic is demultiplexed at these levels.
IP_1 PPP IP_2 ATM1483_1 ATM1483_2 \ / AAL5 ATM
If the ATM1483_1 ifIndex is used to access this table, then the value of usdIpIfAssocLowerIfIndex will be set to the ifIndex of IP_1. Similarily, if the ATM1483_2 ifIndex is used to access this table, the usdIpifAssocLowerIfIndex will set to the ifIndex of IP_2.
What is usdIpIfAssocIpIfIndex?
Reports the ifIndex of the IP interface layered on top of a given lower-layer interface, letting an admin trace the stack (for example ATM/AAL5 up through PPP to an IP interface); returns 0 where the relationship isn't one-to-one, such as at a shared ATM/AAL5 layer serving multiple customers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2 snmpwalk -v2c -c public <target> Unisphere-Data-IP-MIB::usdIpIfAssocIpIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2.1 snmpget -v2c -c public <target> Unisphere-Data-IP-MIB::usdIpIfAssocIpIfIndex.1
Start monitoring Juniper/Unisphere ERX Edge Router (router-ID/VPN-ID/per-interface IP config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-IP-MIB::usdIpIfAssocIpIfIndex OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (router-ID/VPN-ID/per-interface IP config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.12 | juniIpMIB | Juniper-IP-MIB |
| 1.3.6.1.4.1.4874.2.2.12.1 | juniIpObjects | Juniper-IP-MIB |
| 1.3.6.1.4.1.4874.2.2.12.1.1 | juniIpInterface | Juniper-IP-MIB |
| 1.3.6.1.4.1.4874.2.2.12.1.1.4 | juniIpIfAssocTable | Juniper-IP-MIB |
| 1.3.6.1.4.1.4874.2.2.12.1.1.4.1 | juniIpIfAssocEntry | Juniper-IP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2 | usdIpIfAssocIpIfIndex | Unisphere-Data-IP-MIB |