Unisphere-Data-ERX-System-MIB :: usdERXSysTimingSourceType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsUnisphere-Data-ERX-System-MIBusdERXSysTimingSourceType

usdERXSysTimingSourceType

Module: Unisphere-Data-ERX-System-MIB

OID (symbolic): Unisphere-Data-ERX-System-MIB::usdERXSysTimingSourceType

OID (numeric): 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2

Node type: OBJECT-TYPE

Type: UsdTimingSourceType

Access: read-write

Description: The system timing source type for this entry. This object must be present when setting either the usdERXSysTimingSourceIfIndex or usdERXSysTimingSourceLine objects. Also, if the value of this object is set to timingInternal(2), no other objects should be simultanously set, otherwise the agent will return an error.

What is usdERXSysTimingSourceType?

Specifies the type of timing source (interface-derived, internal, or line-derived) for a given timing selector entry; this object must be set before setting the corresponding IfIndex or Line objects, and setting it to internal must not be combined with other simultaneous sets. Admins choose this type to determine which of the other timing-source objects in the row are applicable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2
snmpwalk -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysTimingSourceType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2.1
snmpget -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysTimingSourceType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2.1 s <value>

Start monitoring Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ERX-System-MIB::usdERXSysTimingSourceType OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.17juniERXSysMIBJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1juniERXSysObjectsJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.1juniERXSysGeneralJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.1.19juniERXSysTimingSelectorTableJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.1.19.1juniERXSysTimingSelectorEntryJuniper-ERX-System-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2usdERXSysTimingSourceTypeUnisphere-Data-ERX-System-MIB