Unisphere-Data-ERX-System-MIB :: usdERXSysSlotControl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsUnisphere-Data-ERX-System-MIBusdERXSysSlotControl

usdERXSysSlotControl

Module: Unisphere-Data-ERX-System-MIB

OID (symbolic): Unisphere-Data-ERX-System-MIB::usdERXSysSlotControl

OID (numeric): 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Administrative control of this slot: noOperation Setting this value has no effect. flush Flushes configuration associated with a card type that previously occupied this slot. Used to explicitly confirm that the slot is now empty, or contains a different card type. Card must be disabled when this value is asserted. See description for usdERXSysSlotDisableReason. reset Resets the slot. forceFailover Forces the slot to failover to backup. noBoot Deconfigure primary release file for the slot. noBootBackup Deconfigure backup release file for the slot.

What is usdERXSysSlotControl?

Issues an administrative action on this slot: flush (clear the expected card-type association), reset, force failover, or deconfigure the primary/backup boot release file. Admins use flush specifically to confirm a slot is now empty or holds a genuinely different card type after a swap.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9
snmpwalk -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysSlotControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9.1
snmpget -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysSlotControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9.1 i <value>

Start monitoring Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ERX-System-MIB::usdERXSysSlotControl OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.17juniERXSysMIBJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1juniERXSysObjectsJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4juniERXSysSlotJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4.2juniERXSysSlotTableJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4.2.1juniERXSysSlotEntryJuniper-ERX-System-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9usdERXSysSlotControlUnisphere-Data-ERX-System-MIB