All MIBs › Unisphere-Data-ERX-System-MIB › usdERXSysBootConfigControl
usdERXSysBootConfigControl
Module: Unisphere-Data-ERX-System-MIB
OID (symbolic): Unisphere-Data-ERX-System-MIB::usdERXSysBootConfigControl
OID (numeric): 1.3.6.1.4.1.4874.2.2.17.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: System boot configuration control: file Revert to configuration settings specified by usdERXSysBootConfigFile. The usdERXSysBootConfigControl and usdERXSysBootConfigFile must be specified together in the same set request PDU. fileOnce Revert to configuration settings specified by usdERXSysBootConfigFile. Do not continue to use file after using it once. The usdERXSysBootConfigControl and usdERXSysBootConfigFile must be specified together in the same set request PDU. factoryDefaults Revert to factory default settings. runningConfiguration Revert to current settings.
What is usdERXSysBootConfigControl?
Controls how the system's boot configuration is determined: from a named file, from a file used once only, from factory defaults, or from the current running configuration. Admins set this, together with usdERXSysBootConfigFile when applicable, to control what configuration the router loads on its next boot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.6 snmpwalk -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysBootConfigControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.6.1 snmpget -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysBootConfigControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.17.1.1.6.1 i <value>
Start monitoring Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ERX-System-MIB::usdERXSysBootConfigControl OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.17 | juniERXSysMIB | Juniper-ERX-System-MIB |
| 1.3.6.1.4.1.4874.2.2.17.1 | juniERXSysObjects | Juniper-ERX-System-MIB |
| 1.3.6.1.4.1.4874.2.2.17.1.1 | juniERXSysGeneral | Juniper-ERX-System-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.17.1.1.6 | usdERXSysBootConfigControl | Unisphere-Data-ERX-System-MIB |