Unisphere-Data-ERX-System-MIB :: usdERXSysAbatedMemUtilThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsUnisphere-Data-ERX-System-MIBusdERXSysAbatedMemUtilThreshold

usdERXSysAbatedMemUtilThreshold

Module: Unisphere-Data-ERX-System-MIB

OID (symbolic): Unisphere-Data-ERX-System-MIB::usdERXSysAbatedMemUtilThreshold

OID (numeric): 1.3.6.1.4.1.4874.2.2.17.1.1.23

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on this system.

The value of this object must be less than the value of usdERXSysHighMemUtilThreshold.

The abated memory utilization trap is sent once if the high memory threshold was reached, and memory utilization falls to the value of this object.

What is usdERXSysAbatedMemUtilThreshold?

Sets the memory utilization percentage that, once utilization falls back to it after a high-utilization event, triggers an abated-memory-utilization event; must be set lower than usdERXSysHighMemUtilThreshold; defaults to 75%. Admins use the gap between the high and abated thresholds to avoid rapid trap flapping around a single value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.23
snmpwalk -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysAbatedMemUtilThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.23.1
snmpget -v2c -c public <target> Unisphere-Data-ERX-System-MIB::usdERXSysAbatedMemUtilThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.17.1.1.23.1 i <value>

Start monitoring Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ERX-System-MIB::usdERXSysAbatedMemUtilThreshold OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (chassis hardware-revision/software-version/redundancy status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.17juniERXSysMIBJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1juniERXSysObjectsJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.1juniERXSysGeneralJuniper-ERX-System-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.17.1.1.23usdERXSysAbatedMemUtilThresholdUnisphere-Data-ERX-System-MIB