All MIBs › Unisphere-Data-DHCP-MIB › usdDhcpProxyClientServerOperStatus
usdDhcpProxyClientServerOperStatus
Module: Unisphere-Data-DHCP-MIB
OID (symbolic): Unisphere-Data-DHCP-MIB::usdDhcpProxyClientServerOperStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Reports the client's current operation status with respect to this server: disabled The client is barred from using this server to obtain new address leases; and any leases from that server, that were in use by the client, have been released. draining The client is barred from using this server to obtain new address leases, but one or more leases from that server, that are in use by the client, will remain in use until they expire naturally. enabled The client may use the server to obtain new address leases, and may have one or more leases currently in use.
Implementations that don't support administrative control of the server always report the value enabled(2).
What is usdDhcpProxyClientServerOperStatus?
Reports this proxy client's actual current operational status toward a specific DHCP server: disabled, draining, or enabled, mirroring the administrative setting but reflecting real state. Admins check this to confirm a server that was set to drain has actually finished releasing all its leases before removing it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.4 snmpwalk -v2c -c public <target> Unisphere-Data-DHCP-MIB::usdDhcpProxyClientServerOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.4.1 snmpget -v2c -c public <target> Unisphere-Data-DHCP-MIB::usdDhcpProxyClientServerOperStatus.1
Start monitoring Unisphere Networks ERX broadband edge routers, later Juniper E-series (DHCP relay option-82/error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-DHCP-MIB::usdDhcpProxyClientServerOperStatus OID value, configure state conditions and alerts, and monitor any Unisphere Networks ERX broadband edge routers, later Juniper E-series (DHCP relay option-82/error-counter status) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.22 | juniDhcpMIB | Juniper-DHCP-MIB |
| 1.3.6.1.4.1.4874.2.2.22.1 | juniDhcpObjects | Juniper-DHCP-MIB |
| 1.3.6.1.4.1.4874.2.2.22.1.2 | juniDhcpProxy | Juniper-DHCP-MIB |
| 1.3.6.1.4.1.4874.2.2.22.1.2.1 | juniDhcpProxyClient | Juniper-DHCP-MIB |
| 1.3.6.1.4.1.4874.2.2.22.1.2.1.2 | juniDhcpProxyClientServerTable | Juniper-DHCP-MIB |
| 1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1 | juniDhcpProxyClientServerEntry | Juniper-DHCP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.4 | usdDhcpProxyClientServerOperStatus | Unisphere-Data-DHCP-MIB |