All MIBs › USR-VHA-MIB › usrVHASessionsClearAlarmThresh
usrVHASessionsClearAlarmThresh
Module: USR-VHA-MIB
OID (symbolic): USR-VHA-MIB::usrVHASessionsClearAlarmThresh
OID (numeric): 1.3.6.1.4.1.429.4.84.10.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The alarm clear threshold for usrVHASessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. This object must also be less than non-zero usrVHASessionsMajorAlarmThresh and usrVHASessionsCricalAlarmThresh. IF usrVHASessionsMajorAlarmThresh is non zero, THEN object must be less than usrVHASessionsMajorAlarmThresh. This value is set indirectly by setting usrVHASessionsClearAlarmThreshPct Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHASessionsAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHASessionsAlarmState will change to 'clear'. See usrVHASessionsAlarmState for TRAP generation details.
What is usrVHASessionsClearAlarmThresh?
It is the threshold at which the session-count alarm returns to 'clear' after a major or critical alarm, set indirectly via usrVHASessionsClearAlarmThreshPct and kept below the non-zero major/critical thresholds. An admin relies on this lower threshold, rather than the same value that triggered the alarm, to avoid the alarm state flapping right at the boundary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.1.3 snmpwalk -v2c -c public <target> USR-VHA-MIB::usrVHASessionsClearAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.1.3.1 snmpget -v2c -c public <target> USR-VHA-MIB::usrVHASessionsClearAlarmThresh.1
Start monitoring CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-VHA-MIB::usrVHASessionsClearAlarmThresh OID value, configure state conditions and alerts, and monitor any CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.84 | usrVHA | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.84.10 | usrVHAPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.1 | usrVHASessionsPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.1.3 | usrVHASessionsClearAlarmThresh | USR-VHA-MIB |