All MIBs › USR-VHA-MIB › usrVHAPktThroughputValue
usrVHAPktThroughputValue
Module: USR-VHA-MIB
OID (symbolic): USR-VHA-MIB::usrVHAPktThroughputValue
OID (numeric): 1.3.6.1.4.1.429.4.84.10.4.12
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: The value of the statistic during the last measurement interval. usrVHAPktCounts is sampled at the start and at the end of a measurement interval. This MIB object represents the delta value between these two samples. The interval MIB object is usrVHAPktThroughputInterval. The value of this MIB object is the value that is compared with the 3 thresholds for alarm generation. The value during the current measurement period is not made available until the measurement period is completed ahd will remain available until the next period completes.
What is usrVHAPktThroughputValue?
It is a gauge holding the packet throughput (based on usrVHAPktCounts) measured as a delta between the start and end of the most recent usrVHAPktThroughputInterval. This is the value directly compared against the three packet-throughput alarm thresholds; an admin reads it to see current RP packet-processing load, keeping in mind the in-progress interval's value isn't available until that interval completes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.4.12 snmpwalk -v2c -c public <target> USR-VHA-MIB::usrVHAPktThroughputValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.4.12.1 snmpget -v2c -c public <target> USR-VHA-MIB::usrVHAPktThroughputValue.1
Start monitoring CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-VHA-MIB::usrVHAPktThroughputValue OID value, configure state conditions and alerts, and monitor any CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.84 | usrVHA | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.84.10 | usrVHAPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.4 | usrVHAPktThroughputPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.4.12 | usrVHAPktThroughputValue | USR-VHA-MIB |