USR-VHA-MIB :: usrVHAFailedSessionsValue

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › USR-VHA-MIB › usrVHAFailedSessionsValue

usrVHAFailedSessionsValue

Module: USR-VHA-MIB

OID (symbolic): USR-VHA-MIB::usrVHAFailedSessionsValue

OID (numeric): 1.3.6.1.4.1.429.4.84.10.3.11

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: The value of the statistic during the last measurement interval. usrVHARegReqDenied is sampled at the start and at the end of a measurement interval. This MIB object represents the delta value between these two samples. The interval MIB object is usrVHAFailedSessionsInterval. The value of this MIB object is the value that is compared with the 3 thresholds for alarm generation. The value during the current measurement period is not made available until the measurement period is completed and will remain available until the next period completes.

What is usrVHAFailedSessionsValue?

It is a gauge holding the number of failed RP sessions (specifically usrVHARegReqDenied) measured as a delta between the start and end of the most recent usrVHAFailedSessionsInterval. This is the value directly compared against the three failed-session alarm thresholds; an admin reads it to see the current failure rate, keeping in mind the value for the in-progress interval isn't available until that interval completes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.3.11
snmpwalk -v2c -c public <target> USR-VHA-MIB::usrVHAFailedSessionsValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.3.11.1
snmpget -v2c -c public <target> USR-VHA-MIB::usrVHAFailedSessionsValue.1

Start monitoring CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-VHA-MIB::usrVHAFailedSessionsValue OID value, configure state conditions and alerts, and monitor any CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.84usrVHAUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.84.10usrVHAPMUSR-VHA-MIB
1.3.6.1.4.1.429.4.84.10.3usrVHAFailedSessionsPMUSR-VHA-MIB
1.3.6.1.4.1.429.4.84.10.3.11usrVHAFailedSessionsValueUSR-VHA-MIB