All MIBs › USR-VHA-MIB › usrVHAFailedSessionsClearAlarmThresh
usrVHAFailedSessionsClearAlarmThresh
Module: USR-VHA-MIB
OID (symbolic): USR-VHA-MIB::usrVHAFailedSessionsClearAlarmThresh
OID (numeric): 1.3.6.1.4.1.429.4.84.10.3.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The alarm clear threshold for usrVHAFailedSessionsValue gauge. This object must be less than usrVHAFailedSessionsMajorAlarmThresh (if non-zero) usrVHAFailedSessionsCricalAlarmThresh (if non-zero).. This value is set indirectly by setting usrVHAFailedSessionsClearAlarmThreshPct Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHAFailedSessionsAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHAFailedSessionsCriticalAlarmState will change to 'clear'. See usrVHAFailedSessionsAlarmState for trap generation details.
What is usrVHAFailedSessionsClearAlarmThresh?
It is the threshold at which the failed-sessions alarm returns to 'clear', set indirectly via usrVHAFailedSessionsClearAlarmThreshPct and kept below the non-zero major/critical thresholds. An admin relies on this lower value to avoid the failed-session alarm flapping right at the trigger boundary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.3.3 snmpwalk -v2c -c public <target> USR-VHA-MIB::usrVHAFailedSessionsClearAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.3.3.1 snmpget -v2c -c public <target> USR-VHA-MIB::usrVHAFailedSessionsClearAlarmThresh.1
Start monitoring CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-VHA-MIB::usrVHAFailedSessionsClearAlarmThresh OID value, configure state conditions and alerts, and monitor any CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.84 | usrVHA | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.84.10 | usrVHAPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.3 | usrVHAFailedSessionsPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.3.3 | usrVHAFailedSessionsClearAlarmThresh | USR-VHA-MIB |