All MIBs › USR-VHA-MIB › usrVHAActiveSessionsClearAlarmThresh
usrVHAActiveSessionsClearAlarmThresh
Module: USR-VHA-MIB
OID (symbolic): USR-VHA-MIB::usrVHAActiveSessionsClearAlarmThresh
OID (numeric): 1.3.6.1.4.1.429.4.84.10.2.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The alarm clear threshold for usrVHAActiveSessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. This object must also be less than non-zero usrVHAActiveSessionsMajorAlarmThresh and non-zero usrVHAActiveSessionsCricalAlarmThresh. This value is set indirectly by setting usrVHAActiveSessionsClearAlarmThreshPct Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHAActiveSessionsAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHAActiveSessionsCriticalAlarmState will change to 'clear'. See usrVHAActiveSessionsAlarmState for trap generation details.
What is usrVHAActiveSessionsClearAlarmThresh?
It is the threshold at which the active-sessions alarm returns to 'clear', set indirectly via usrVHAActiveSessionsClearAlarmThreshPct and kept below the non-zero major/critical thresholds. An admin relies on this lower clear threshold to build hysteresis into the active-session alarm and avoid it flapping.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.2.3 snmpwalk -v2c -c public <target> USR-VHA-MIB::usrVHAActiveSessionsClearAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.84.10.2.3.1 snmpget -v2c -c public <target> USR-VHA-MIB::usrVHAActiveSessionsClearAlarmThresh.1
Start monitoring CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-VHA-MIB::usrVHAActiveSessionsClearAlarmThresh OID value, configure state conditions and alerts, and monitor any CommWorks/3Com mobility gateway, carrier broadband access equipment supporting Mobile IP (VHA binding/tunnel status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.84 | usrVHA | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.84.10 | usrVHAPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.2 | usrVHAActiveSessionsPM | USR-VHA-MIB |
| 1.3.6.1.4.1.429.4.84.10.2.3 | usrVHAActiveSessionsClearAlarmThresh | USR-VHA-MIB |