All MIBs › USR-IPOA-ARP-MIB › usrIpoaLisDefaultPeakCellRate
usrIpoaLisDefaultPeakCellRate
Module: USR-IPOA-ARP-MIB
OID (symbolic): USR-IPOA-ARP-MIB::usrIpoaLisDefaultPeakCellRate
OID (numeric): 1.3.6.1.4.1.429.4.46.1.2.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: This object is the signalling parameter that should be used when setting up all best effort VCCs. This parameter applies to the forward and backward direction on a per best effort VCC basis. A value of zero implies that no configured default exists and that local policy should be used to determine the actual default to used during call setup. ATM Signaling Support for IP over ATM (RFC 1755) recommends 1/10th of the ATM interface's speed.
What is usrIpoaLisDefaultPeakCellRate?
The peak cell rate signalled when setting up best-effort VCCs, applied in both directions per VCC. A value of 0 means no default is configured and local policy decides; the referenced RFC suggests one tenth of the interface speed.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.46 | usrIpoa | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.46.1 | usrIpoaObjects | USR-IPOA-ARP-MIB |
| 1.3.6.1.4.1.429.4.46.1.2 | usrIpoaLisTable | USR-IPOA-ARP-MIB |
| 1.3.6.1.4.1.429.4.46.1.2.1 | usrIpoaLisEntry | USR-IPOA-ARP-MIB |
| 1.3.6.1.4.1.429.4.46.1.2.1.11 | usrIpoaLisDefaultPeakCellRate | USR-IPOA-ARP-MIB |