All MIBs › USR-INVERSEARP-MIB › usrInverseARPPhysAddress
usrInverseARPPhysAddress
Module: USR-INVERSEARP-MIB
OID (symbolic): USR-INVERSEARP-MIB::usrInverseARPPhysAddress
OID (numeric): 1.3.6.1.4.1.429.4.73.1.1.2
Node type: OBJECT-TYPE
Type: PhysAddress
Access: read-write
Description: The media-dependent `physical' address. For Frame Relay PTMP network, it's six byte long; 4 byte DLCI followed by 2byte interface(physical) index
What is usrInverseARPPhysAddress?
usrInverseARPPhysAddress holds the Frame Relay 'physical' address for this Inverse ARP cache entry, which for a point-to-multipoint network is a 6-byte value made of a 4-byte DLCI followed by a 2-byte physical interface index, per its description. An admin decodes this value when diagnosing which DLCI a given remote IP address maps to over a Frame Relay PTMP link, since Frame Relay doesn't use a MAC address the way Ethernet does. For example, a usrInverseARPPhysAddress value encoding DLCI 100 on physical index 1 tells an admin that traffic to the paired usrInverseARPNetAddress goes out DLCI 100.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.73.1.1.2 snmpwalk -v2c -c public <target> USR-INVERSEARP-MIB::usrInverseARPPhysAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.73.1.1.2.1 snmpget -v2c -c public <target> USR-INVERSEARP-MIB::usrInverseARPPhysAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.73.1.1.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usrInverseARPPhysAddress.1
Start monitoring 3Com Carrier Division (CommWorks) Frame Relay router/access equipment (Inverse ARP resolution/aging status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-INVERSEARP-MIB::usrInverseARPPhysAddress OID value, configure state conditions and alerts, and monitor any 3Com Carrier Division (CommWorks) Frame Relay router/access equipment (Inverse ARP resolution/aging status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.73 | usrInverseARP | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.73.1 | usrInverseARPTable | USR-INVERSEARP-MIB |
| 1.3.6.1.4.1.429.4.73.1.1 | usrInverseARPEntry | USR-INVERSEARP-MIB |
| 1.3.6.1.4.1.429.4.73.1.1.2 | usrInverseARPPhysAddress | USR-INVERSEARP-MIB |