Description: This object identifies a command that a manager may execute in an agent. The following table describes the supported commands and their corresponding values.

Value Command Type Description 1 _ReadTable_ Read the Table Type specified by the umc1CommandArg 2 _GetAllSeqNbr_ Read All Sequence Numbers 3 _GetActiveTermName_ Read the terminal name of all active terminals 4 _GetCpuDbDumpPort_ Read the port for Cpu Db Dump 5 _SetOrDelete_ Set or Delete the MIB Object specified by umc1CommandArg 6 _ClearCache_ Clear IPMI Agent Cache 7 _RebootIpmi_ Reboot IPMI Card 8 _ActivateAco_ Activate ACO 9 _AotRollover_ AoT to End-To-End Rollover 10 _CurTrafficStats_ Get the Current Traffic Status 11 _GetVcStatusInfo_ Get Virtual Circuit Status Information 12 _GetLineCardStatus_ Get Status Information for Digital Line Card(ADSL's) 13 _GetBlockedVccInfo_ Get Information on blocked VCCs 14 _GetAtmBandwidth_ Get ATM Bandwidth for Uplink circuit 15 _GetAtmStatistics_ Get ATM Statistics 16 _GetAdslBitsPerTone_ Get Bits Per Tone Data for ADSL Line 17 _GetAdslPmAttribute_ Get / Clear ADSL Perfomance Measurement data by attribute 18 _GetPmDataBin_ Get / Clear ADSL or ATM Perfomance Measurement data by bin 19 _GetNBLinkStats_ Get Narrow Band Link Traffic Statistics 20 _DeleteEquipment_ Delete Provisioning and cross-connects for a slot 21 _SoftwareActivation_ Manual Software Activation 22 _ManualProtectionSwitch_ Manual Protection Switch 23 _GetAPSInfo_ Get APS Info 24 _GenericIB_ Generic Get / Set command utilizing IB message types 25 _GetAtmStatsPerVcc_ Get ATM statistic per Vcc 26 _GetDropTestResults_ Get MTU Drop Test results