UDS1-MIB :: uds1StatLoopBackInit

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › UDS1-MIB › uds1StatLoopBackInit

uds1StatLoopBackInit

Module: UDS1-MIB

OID (symbolic): UDS1-MIB::uds1StatLoopBackInit

OID (numeric): 1.3.6.1.4.1.429.1.4.5.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object tells if the loopback was initiated by the network or by command

What is uds1StatLoopBackInit?

Reports whether a loopback currently in effect on this DS1 was initiated by the network, i.e. a carrier test, or by a local command. This distinction matters when troubleshooting, since a network-initiated loop needs to be cleared by the carrier rather than locally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.4.5.1.10
snmpwalk -v2c -c public <target> UDS1-MIB::uds1StatLoopBackInit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.4.5.1.10.1
snmpget -v2c -c public <target> UDS1-MIB::uds1StatLoopBackInit.1

Start monitoring US Robotics/3Com-lineage network access server (NAS) equipment with T1/E1 dial interfaces (DS1 line-config/dial-trunk status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UDS1-MIB::uds1StatLoopBackInit OID value, configure state conditions and alerts, and monitor any US Robotics/3Com-lineage network access server (NAS) equipment with T1/E1 dial interfaces (DS1 line-config/dial-trunk status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.1nasANIC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.1.4uds1UDS1-MIB
1.3.6.1.4.1.429.1.4.5uds1StatTableUDS1-MIB
1.3.6.1.4.1.429.1.4.5.1uds1StatEntryUDS1-MIB
1.3.6.1.4.1.429.1.4.5.1.10uds1StatLoopBackInitUDS1-MIB