All MIBs › UDS1-MIB › uds1CmdCode
uds1CmdCode
Module: UDS1-MIB
OID (symbolic): UDS1-MIB::uds1CmdCode
OID (numeric): 1.3.6.1.4.1.429.1.4.6.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful.
What is uds1CmdCode?
Gives a more specific reason code, such as unrecognized command, no response, device disabled, or pending software download, for why the most recent command failed. This is the detail an admin checks when uds1CmdResult comes back as failed or unable to run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.4.6.1.8 snmpwalk -v2c -c public <target> UDS1-MIB::uds1CmdCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.4.6.1.8.1 snmpget -v2c -c public <target> UDS1-MIB::uds1CmdCode.1
Start monitoring US Robotics/3Com-lineage network access server (NAS) equipment with T1/E1 dial interfaces (DS1 line-config/dial-trunk status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UDS1-MIB::uds1CmdCode OID value, configure state conditions and alerts, and monitor any US Robotics/3Com-lineage network access server (NAS) equipment with T1/E1 dial interfaces (DS1 line-config/dial-trunk status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.1 | nas | ANIC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.1.4 | uds1 | UDS1-MIB |
| 1.3.6.1.4.1.429.1.4.6 | uds1CmdTable | UDS1-MIB |
| 1.3.6.1.4.1.429.1.4.6.1 | uds1CmdEntry | UDS1-MIB |
| 1.3.6.1.4.1.429.1.4.6.1.8 | uds1CmdCode | UDS1-MIB |