UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB :: bridgeStpAgeingTime

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB › bridgeStpAgeingTime

bridgeStpAgeingTime

Module: UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB

OID (symbolic): UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB::bridgeStpAgeingTime

OID (numeric): 1.3.6.1.4.1.7800.2.500.3.1.3.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Ageing-time is translated to other value : 

--------------------------------------------
input value                     |       translated value
--------------------------------------------
10 - 13                         |       8
--------------------------------------------
14 - 26                         |       17
--------------------------------------------
27 - 52                         |       35
--------------------------------------------
53 - 106                        |       70
--------------------------------------------
107 - 214                       |       142
--------------------------------------------
215 - 286                       |       286
--------------------------------------------

What is bridgeStpAgeingTime?

Sets the bridge's MAC address ageing time in seconds; the device snaps whatever value is requested into one of several fixed buckets (e.g. a request of 10-13 becomes 8 seconds, 215-286 becomes 286 seconds).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.2.500.3.1.3.1.1.2
snmpwalk -v2c -c public <target> UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB::bridgeStpAgeingTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.2.500.3.1.3.1.1.2.1
snmpget -v2c -c public <target> UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB::bridgeStpAgeingTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.2.500.3.1.3.1.1.2.1 i <value>

Start monitoring Ubiquoss Corp. EPON ONT devices (switch-port VLAN/spanning-tree config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB::bridgeStpAgeingTime OID value, configure state conditions and alerts, and monitor any Ubiquoss Corp. EPON ONT devices (switch-port VLAN/spanning-tree config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7800ubiquossUBIQUOSS-SMI
1.3.6.1.4.1.7800.2ubiMgmtUBIQUOSS-SMI
1.3.6.1.4.1.7800.2.500ubiEponGroupMIBUBIQUOSS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.7800.2.500.3ubiOntSwitchMIBUBIQUOSS-EPON-ONTMANAGER-GROUP-MIB
1.3.6.1.4.1.7800.2.500.3.1ubiOntSwitchMIBObjectsUBIQUOSS-EPON-ONTMANAGER-GROUP-MIB
1.3.6.1.4.1.7800.2.500.3.1.3stpConfigUBIQUOSS-EPON-ONTMANAGER-GROUP-MIB
1.3.6.1.4.1.7800.2.500.3.1.3.1stpGlobalTableUBIQUOSS-EPON-ONTMANAGER-GROUP-MIB
1.3.6.1.4.1.7800.2.500.3.1.3.1.1stpGlobalEntryUBIQUOSS-EPON-ONTMANAGER-GROUP-MIB
1.3.6.1.4.1.7800.2.500.3.1.3.1.1.2bridgeStpAgeingTimeUBIQUOSS-EPON-ONTMANAGER-GROUP-MIB