All MIBs › UB-INTERNETWORKING-MIB › ubQuickReset
ubQuickReset
Module: UB-INTERNETWORKING-MIB
OID (symbolic): UB-INTERNETWORKING-MIB::ubQuickReset
OID (numeric): 1.3.6.1.4.1.75.1.2.1.5.3.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is ubQuickReset?
Set this to enabled(2) to turn on the card's quick-reset feature (or disabled(1) to turn it off); when enabled, the card can recover from certain fault conditions faster than a full reset cycle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.75.1.2.1.5.3.3 snmpwalk -v2c -c public <target> UB-INTERNETWORKING-MIB::ubQuickReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.75.1.2.1.5.3.3.1 snmpget -v2c -c public <target> UB-INTERNETWORKING-MIB::ubQuickReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.75.1.2.1.5.3.3.1 i <value>
Start monitoring UB Networks (Ungermann-Bass) routers and bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UB-INTERNETWORKING-MIB::ubQuickReset OID value, configure state conditions and alerts, and monitor any UB Networks (Ungermann-Bass) routers and bridges from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.75 | ubNode | UB-INTERNETWORKING-MIB |
| 1.3.6.1.4.1.75.1 | ubEquip | UB-INTERNETWORKING-MIB |
| 1.3.6.1.4.1.75.1.2 | ubInternetworking | UB-INTERNETWORKING-MIB |
| 1.3.6.1.4.1.75.1.2.1 | ubRISCFddiBrouter | UB-INTERNETWORKING-MIB |
| 1.3.6.1.4.1.75.1.2.1.5 | ubNVM | UB-INTERNETWORKING-MIB |
| 1.3.6.1.4.1.75.1.2.1.5.3 | ubSystemParams | UB-INTERNETWORKING-MIB |
| 1.3.6.1.4.1.75.1.2.1.5.3.3 | ubQuickReset | UB-INTERNETWORKING-MIB |