TY1250I-MIB :: ty1250DiagNetLineStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTY1250I-MIBty1250DiagNetLineStatus

ty1250DiagNetLineStatus

Module: TY1250I-MIB

OID (symbolic): TY1250I-MIB::ty1250DiagNetLineStatus

OID (numeric): 1.3.6.1.4.1.466.3.11.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The Current status of the physical interface. Your network carrier can send Out-of-Service or Maintenance Mode codes.

What is ty1250DiagNetLineStatus?

Reports the current status of the physical network interface: in-sync (1), out-of-service (2), out-of-frame (3), bpv-threshold-failure (4), loss-of-signal (5), or simplex-current-loopback (6); the carrier can push out-of-service or maintenance-mode codes. Admins check this first when troubleshooting a DDS/SW56 line problem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.11.1
snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250DiagNetLineStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.11.1.1
snmpget -v2c -c public <target> TY1250I-MIB::ty1250DiagNetLineStatus.1

Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250DiagNetLineStatus OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.466tylinkTY1250I-MIB
1.3.6.1.4.1.466.3ty1250TY1250I-MIB
1.3.6.1.4.1.466.3.11ty1250DiagNetTableTY1250I-MIB
1.3.6.1.4.1.466.3.11.1ty1250DiagNetLineStatusTY1250I-MIB